BYV29-XXX, byv29f-xxx, byv29b -xxx, ug8xt, ugf8xt, ugb8xt www.vishay.com vishay general semiconductor revision: 23-feb-16 1 document number: 88557 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrafast rectifier features ? power pack ? glass passivated pellet chip junction ? ultrafast recovery time ? low switching losses, high efficiency ? low forward voltage drop ? high forward surge capability ? meets msl level 1, per j-st d-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 275 c max. 10 s, per jesd 22-b106 (for to-220ac and ito-220ac package) ? aec-q101 qualified ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc/dc converters, and other powe r switching application. mechanical data case: to-220ac, ito-220ac, to-263ab ? molding compound meets ul 94 v-0 flammability rating base p/n-e3 - rohs-co mpliant, commerical grade base p/nhe3 - rohs-compliant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? e3 suffix meets jesd 201 cla ss 2 whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: as marked mounting torque: 10 in-lbs max. ? primary characteristics i f(av) 8.0 a v rrm 300 v to 400 v i fsm 110 a t rr 35 ns v f 1.03 v t j max. 150 c package to-220ac, ito-220ac, to-263ab diode variatio ns single die to-263ab case pin 2 pin 1 to-220ac byv29, ug8 series ito-220ac byv29f, ugf8 series byv29b, ugb8 series pin 1 pin 2 k heatsink 1 2 1 2 k pin 2 pin 1 1 2 maximum ratings (t c = 25 c unless otherwise noted) parameter symbol byv29-300 byv29-400 unit ug8ft ug8gt maximum repetitive pe ak reverse voltage v rrm 300 400 v maximum working reverse voltage v rwm 300 400 v maximum rms voltage v rms 210 280 v maximum dc blocking voltage v dc 300 400 v maximum average forward rectified current at t c = 100 c i f(av) 8.0 a peak forward surge current 8. 3 ms single ha lf sine-wave superimposed on rated load i fsm 110 a operating junction and storage temperature range t j , t stg -40 to +150 c isolation voltage (ito-220a c only) from te rminal to heat sink t = 1 min v ac 1500 v
BYV29-XXX, byv29f-xxx, byv29b -xxx, ug8xt, ugf8xt, ugb8xt www.vishay.com vishay general semiconductor revision: 23-feb-16 2 document number: 88557 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test: 300 s pulse width, 1 % duty cycle ? note (1) aec-q101 qualified electrical characteristics (t c = 25 c unless otherwise noted) parameter test conditions symbol byv29-300 ug8ft byv29-400 ug8gt unit maximum instantaneous forward voltage i f = 8 a t j = 25 c v f (1) 1.25 v t j = 150 c 1.03 i f = 20 a t j = 25 c 1.40 maximum dc reverse current at v rrm t c = 25 c i r 10 a t c = 100 c 350 maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 35 ns maximum reverse recovery time i f = 1.0 a, di/dt = 100 a/s, ? v r = 30 v, i rr = 0.1 i rm t rr 50 ns maximum reverse recovery current i f = 10 a, di/dt = 50 a/s, ? v r = 30 v, t c = 100 c i rm 5.5 a maximum recovered stored charged i f = 2 a, di/dt = 20 a/s, ? v r = 30 v, i rr = 0.1 i rm q rr 55 nc thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol byv29 ug8 byv29f ugf8 byv29b ugb8 unit typical thermal resistance from junction to case r ? jc 2.5 5.5 2.5 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ac byv29-400-e3/45 1.80 45 50/tube tube ito-220ac byv29f-400-e3/45 1.95 45 50/tube tube to-263ab byv29b-400-e3/45 1.77 45 50/tube tube to-263ab byv29b-400-e3/81 1.77 81 800/reel tape and reel to-220ac byv29-400he3/45 (1) 1.80 45 50/tube tube ito-220ac byv29f-400he3/45 (1) 1.95 45 50/tube tube to-263ab byv29b-400he3/45 (1) 1.77 45 50/tube tube to-263ab byv29b-400he3/81 (1) 1.77 81 800/reel tape and reel
BYV29-XXX, byv29f-xxx, byv29b -xxx, ug8xt, ugf8xt, ugb8xt www.vishay.com vishay general semiconductor revision: 23-feb-16 3 document number: 88557 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t c = 25 c unless otherwise noted) ? fig. 1 - maximum forward current derating curve fig. 2 - maximum non-repetitive peak forward surge current fig. 3 - typical instantaneous forward charateristics fig. 4 - typical reverse leakage charateristics fig. 5 - reverse switching characteristics per leg fig. 6 - typical j unction capacitance 0 0 6 8 10 12 75 50 25 100 125 150 175 4 2 average forwar d rectified current (a) ca s e temperature (c) re s i s tive or inductive load 0 25 50 75 100 125 150 1 100 10 number of cycle s at 60 hz peak forwar d s urge current (a) t c = 100 c 8.3 m s s ingle half s ine-wave 0.4 0.2 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 10 100 1 in s tantaneou s forward voltage (v) in s tantaneou s forward current (a) t j = 125 c t j = 25 c t j = 100 c 20 60 40 100 80 0.01 0.1 10 1 100 1000 percent of rated peak rever s e voltage (%) in s tantaneou s rever s e leakage current (a) t j = 125 c t j = 25 c t j = 100 c 0 25 50 20 40 60 80 100 120 140 160 75 100 125 s tored charge/rever s e recovery time (nc/n s ) junction temperature (c) di/dt = 150 a/ s di/dt = 100 a/ s di/dt = 150 a/ s di/dt = 100 a/ s di/dt = 50 a/ s di/dt = 20 a/ s di/dt = 20 a/ s t rr q rr 0.1 10 1 100 10 1 100 rever s e voltage (v) junction capacitanc e (pf) t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p
BYV29-XXX, byv29f-xxx, byv29b -xxx, ug8xt, ugf8xt, ugb8xt www.vishay.com vishay general semiconductor revision: 23-feb-16 4 document number: 88557 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) to-220ac case pin 2 pin 1 0.635 (16.13) 0.625 (15.87) 0.415 (10.54) max. 0.154 (3.91) dia. 0.148 (3.74) dia. 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) pin 12 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 0.145 (3.68) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.185 (4.70) 0.175 (4.44) ito-220ac pin 1 2 0.025 (0.64) 0.015 (0.38) 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) ref. 0.076 (1.93) ref. 45 ref. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.191 (4.85) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.671 (17.04) 0.651 (16.54) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 7 ref. 7 ref. 0.350 (8.89) 0.330 (8.38) 0.140 (3.56) dia. 0.125 (3.17) dia. 0.135 (3.43) dia. 0.122 (3.08) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) to-263ab mounting pad layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) min. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min. 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) min.
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
